New Work In Progress: The Jag

So, it's been a while since I had something new to post - partly due to summer break from CCSF and partly due to working on the edition of the Alpha Son print, now available in my Etsy shop (!)

Now that that is wrapped up, I'm on to the next project. This one will add a third plate to the layered linocut technique. An early proof that was created as part of the offset transfer to the third plate is here:

It shows two of the plates, not fully inked and also not fully cut, but it gives the idea. Colors are yet to be tweaked. Here's a close-up:

And here's the source: a beautiful 1955 Jaguar XK. Challenging to do it justice...

In the studio: Alpha Son color plate

After proofing the key black plate for "Alpha Son", I transferred the image to another plat and cut away the second colored plate. I remembered to bring my camera into the studio today to capture the work in process in a studio environment.

Both plate on an inking surface, with colors rolled out

I had visions of using the bold colors of some of the original cars I drew from in my second colored plate. Given the  bold outlines for each car, I had the option of inking individual cars with unique colors, almost like an a la poupee inking in etching.

After printing the colored plat with selective areas printed; inked black plate in place, ready to print

As I proofed in red with transparent blue and orange with transparent green. there were parts that I liked, but wasn't satisfied by the composition as a whole.

After printing the black plate over the multi-colored printed colored plate

Finally, I tried proofing with an opaque cream on the second plate. 

After printing the colored plate inked in opaque cream

I liked bringing the unity of a single color across all the subjects, but keeping the color impact subtle, to enjoy the strong black and white composition of the key black plate.

Cream printed proof on the drying rack

It's always a journey, but I think we are now approaching the edition proof!

Working Title: Alpha Son

So, it's been a while since I last posted - I was working on printing full editions of the Mont Saint Michel print and then went back to do an edition of the much enjoyed Lobster Pot print (will be working to get those on the Etsy store soon!). Then I started a couple new linocuts, one of which is quite large, so that took a while. The dimensions are the same as the Zero Sum Game, but I'm planning to develop it into a two-plate linocut that could be made into a book, but would also look nice as a poster.

As for content, I am continuing to explore automotive muses, thanks to my husband. I took several photos at a vintage car driving event and assembled a collage to use as a reference source:

Here's an early proof of the key plate, working title, Alpha Son:

"Zero Sum Game" Book, final

This book project started a couple years ago now and required me to delve into some new topics, like bookbinding, in order to complete my vision. Of course, other projects came up and I'm only now finishing the first set of books (a prototype was completed in September).


See earlier coverage of printing and assembling the core parts of the book here and here.


For the final stages, I carved and printed a cover with a title (inspired by learning about game theory in my micro-economics class taken in my semester off from print making) and solid black back. Unlike the soft cover on the Belize book, this cover and backing were separate and would leave the binding area exposed. 

First, gluing inside the front cover...

Once the cover (image side) is affixed, gluing the inside flap...

Once the front and back covers were glued on and dried under a heavy book, I bound the books with black thread, much like standard signature binding, or decorative longstitch (minus the soft cover to stitch through).

Treating each inside page fold as a signature, using a template and heavy duty paper awl to create six holes...

Leaving a tail to tie off in the first signature...

One of the reasons I wanted to leave the binding exposed was to show off the rhythmic stitching...

And repeat... and repeat...

Once I finish the set, I'll take some nicer photos and post one for sale on my Etsy shop!

Experimenting with Mont St Michel print

This is why I love printmaking: you can start with a core image, or component of an image, and experiment  in dozens of ways to find the complete look.


In November, I proofed the first plate of another two-plate linocut of Mont St. Michel. In December, I trialed a number of combinations with a second color, using a plexiglass monoprint plate to ink, etc.

Starting with a simple, solid roll-up..

Printing the ghost of the roll-up achieved a subtler color. In some ways, closer to what I envisioned...

While trying to find the right shade, I pulled out the color in the middle-ground...

Also tried printing color in only the sky...

Finally pulled out the carving tools and cut the second plate

New Work in Progress: Mont Saint Michel

I rarely work outside the studio, but for various reasons I took home my latest plate last week to get a bit more work done. Unlike etching or aquatint, linocuts are relatively easy to do from home, particularly a small one. The piece I am working on is a 4" x 6" two-plate lino based on a photo I took in Mont Saint-Michel last summer. The photo offered a unique and challenging composition and I may have been subtly influenced by Frans Masereel after Mike Kimball's comment on my lino book post. Since I was able to take a few photos of the plate in progress, I thought  would share them now that I have an early proof of the first plate.

Mont Saint-Michel source photo

Plate in process

Plate in process detail

Early proof

SF linocut book project, continued

Now that class is underway again at CCSF, I'm moving along on my latest linocut book. I've trimmed, folded, and pasted together seven books and now need to figure out how I want to bind them. In the meantime, one of the folded copies will be put on display in Building B of Fort Mason, along with the Belize book, my mezzotint, and an uncut print of this book.

Linocut book in process

I liked making the Belize book so much, that I decided to do another one using linocut instead of etching.

The squares are 4x4, which makes it much easier for linocut. The source photos were from a shoot that I was in for an SF Zero game in 2007.

The idea behind the shoot was to create a film noir feel on various San Francisco sites.

The images already had a strong graphic quality to them, which is great for linocut.

Unlike the Goodwill book and the Belize book, this one will not have any text and will just rely on the images to imply a story.

I managed to take a couple of good proofs before the semester ended, but I may still tweak some things.

I'm considering creating a second plate in the fall to add color.

I'll keep you posted ;)